- Plant Build with heavy duty Duly painted Mild Steel Tubes.
- Well insulated Doors.
- Inner partitions of cooling chamber, where the product may have chance to contact are made with SS 304 filled with insulation.
- 300 moulds will be supplied with the Mould size: 300 x 225 x 30mm
- Speed up to 12 to 15 moulds/minute
- Automatic Demoulding system.
- Mould Pre-heater
- Vibration Section
- Depositor: Depositor tank build with painted MS and Inner (Contact part) SS 304, Aluminum head with total 20 no’s of pistons.
- Supplied one set of Nozzle plate.
- Multi-Tier Cooler with 10.0 Hp Emerson make Chiller Unit for Cooling Tunnel temp around 4˚C to 6˚C.
- Hot Water System for Depositor
- 220 approx moulds to fill plant
- Cooling Time: 18.4 minutes at 15 moulds/minute
- 14.5 meters overall length
- Power Supply: 415 volts, 3 phase Main motor 2.2kw and 0.37 kw.
- All pneumatic cylinders are branded (Festo/SMC).